-
220 Series Explosion-Proof Duct Heaters
CSA Approved for Class I, Division 2 locations where a hazardous gas is occasionally present. Ignition temperatures as low as 392°F (200°C) for ducts up to 240″ (610 cm) wide by 120″ (305 cm) high. Ratings up to 1000 kW, 600 volts.
-
227 Series Explosion-Proof Duct Heaters
CSA Approved for Class I, Division 2 locations where a hazardous gas is occasionally present. Ignition temperatures as low as 392°F (200°C) for ducts up to 240″ (610 cm) wide by 120″ (305 cm) high. Ratings up to 1000 kW, 600 volts.
-
233 Series Explosion-Proof Unit Heater
Heatrex’s 233 Series Exp explosion-proof unit heater is designed with both safety and versatility in mind.
-
234 Series Washdown/Corrosion Resistant Unit Heater
The Heatrex 234 Series unit heater is the perfect solution to the problem of heating people or equipment in non-hazardous environments where moisture and corrosion exist.
-
236 Series Compact Explosion-Proof Unit Heater
Heatrex’s Compact explosion-proof unit heater is designed with both size and economy in mind.
-
238 Series Unit Heater
Heatrex’s 238 Series industrial unit heater is designed for maximum heating performance in non-hazardous and non-corrosive environments.
-
240 Series Unit Heater
The 240 Series unit heater provides quiet, reliable, horizontal airflow for commercial and industrial applications.
-
254 Series Explosion-Proof Convector
Heatrex’s 254 Series explosion-proof convector is designed to provide a heavy duty and corrosion resistant heat source.
-
903 Series General Compact Baseboard Heater
The 903 Series baseboard heater is more compact than any other heater on the market, yet it provides a high level of performance and strength. The unit’s trim design enhances its appearance and rounded corners eliminate the sharp edges found on square heaters.
-
905/907 Series Industrial Steel Sill-Height Convectors
The 905/907 Series industrial sill-height convectors are designed to fit under large windows to prevent cold down drafts. The heaters are ideal for heavy traffic areas with high heating requirements.
-
906 Series Architectural Aluminum Sill-Height Flat Top Convector
The 906 Series architectural sill-height convectors are designed to fit under large windows to prevent cold down drafts. These heaters can provide total or supplemental heating for a variety of applications.
-
908 Series Commercial Steel Slope-Top Convector
Furnish and install, where indicated on plans, 908I Commercial Slope-Top convector type heaters, suitable for continuous operation, as manufactured by Heatrex.
-
909/911 Series Commercial Steel Sill-Height Convector
The 909 series is listed for wall mounted applications, while the 911 series is listed for pedestal mounting and comes standard with pedestal kits for mounting and in-field adjustment.
-
912/913 Commercial Steel High Watt Density Sill-Height Convector
The 912/913 convectors are designed to heat large commercial spaces. They provide large amounts of heat without the fan noise associated with unit heaters.
-
914 Series Mini Architectural Aluminum Draft Barrier
The 914 Series mini draft barrier heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications.
-
916 Series Architectural Aluminum High Watt Density Draft Barrier
The 916 Series high watt density draft barrier heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications.
-
918 Series
918 Series are designed to supply efficient radiant heat. They provide greater comfort at lower temperature settings and can be set up for individual or zone control to reduce energy costs.
-
922 Series Cabinet Unit Heater
The 922 Series cabinet heater offers a unique combination of quality, efficiency, reliability and flexibility. The attractive cabinet design blends into any commercial decor.
-
925 Series
The 925 series unit heater is an economical choice for commercial heating applications and is ideal for primary or spot heating applications. Units can be wall or ceiling-mounted for horizontal airflow.
-
930 Series Register Wall Heater
The 930 Series register wall heater is ideal for use as a primary heat source in small areas or as supplemental heat in more spacious areas. Multiple heaters can be used to effectively heat large or odd-shaped rooms.
-
931 Series Commercial Ceiling Heater
The 931 Series ceiling heater is designed for commercial use in areas where no wall space is available. It provides supplemental heat to prevent cold drafts or wide temperature swings.
-
932 Series Commercial Fan-Forced Large Wall Heater
The 932 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
-
933 Series Architectural Wall Heater
The 933 Series fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
-
934 Series Economical Wall Heater
The 934 Series wall heater is designed for recessed mounting into shallow 2-inch by 3-inch stud walls. It provides heat in a quiet, efficient manner. Single units can heat small areas and multiple heaters can be used in large or odd shaped rooms.
-
935 Series European Style Wall Heater
The 935 Series wall heater has a stylish contemporary design with rounded corners and soft lines for an elegant appearance. This heater is ideal for areas with space restrictions and high heating requirements.
-
937 Series Fan-Forced Ceiling Heater
The 937 Series ceiling heaters are designed for commercial applications. The 937 Series heater is designed for recessed mounting and installation into 2-feet by 2-feet ceiling grids. The 937 Series comes with a built-in flange; an additional trim ring kit is not required.
-
938 Series Fan-Forced Toe-Space Heater
The 938 Series heater is designed for installation in places where other heaters do not fit. These heaters can be installed into the toe space or kick space below a cabinet, in the soffit above a cabinet or into risers of a stairway.
-
939 Series Fan-Forced Floor Heater
The 939 Series floor heater is compact to fit into tight spaces. It is designed to mount between the floor joists.
-
940 Series Hybrid Convection Wall Heater
The 940 Series wall heater is a unique design and offers two levels of heating. The first level is convection heat with a second level of forced-air heating. This feature combines the quiet operation of convection heating for normal heating conditions and when needed a boost to forced-air heating with greater heating capacity, all in the same unit. This is well suited for condominiums when an up scale appearance is required.
-
941 Series Ceiling Heater
The 941 Series ceiling heater is designed for recessed mounting into a ceiling. It provides heat in a quiet, efficient manner. Single units can heat small areas and multiple heaters can be used in large or odd-shaped rooms.
-
950 Series Residential Wall Heater
The heating equipment shall include an electric automatic fan forced air heater suitable for small area heating, as manufactured by Heatrex. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
-
AS Series Radiant Ceiling Panels
AS Series radiant panels are ideal for offsetting heat loss through exterior glass on the perimeter of a building. They help to control the problem of condensation typically found with these large exterior glass walls. Radiant panels provide improved comfort by maintaining an even temperature from floor to ceiling.
-
Custom HVAC Duct Heater
Heatrex offers special heaters for use in air handling and air conditioning equipment. A wide range of special construction techniques has been developed to insure proper operation as well as easy installation, either in the OEM’s plant or in the field.
-
Finned Tubular HVAC Duct Heater
Our product offering ranges from standard tubular heating elements to the most sophisticated, custom designed systems. Our attention to detail and rigorous testing give worldwide customers premium products that they receive quickly and at a fair price.
-
Open Coil HVAC Duct Heater
Heatrex has developed heater lines to satisfy most typical space heating requirements, simplifying specification, ordering and delivery. Both standard and quick ship delivery programs are available for the full line of heaters.
-
STS
Whether you have a warehouse, dock, or workshop to keep heated, STS is the smart choice. Let the quartz era end and a revolution begin with a zero-maintenance heater. You’ll never worry about bulbs to replace or reflectors to clean.
-
STT
SST Thin includes all of the features and benefits of the STS, in a new, slimmer, modern design. Packed with more heat per square inch, the SST Thin is perfect for all of your heating needs.
