UHIR Unit Heater

Heatrex has 50 standard models of UHIR unit heaters available. These heaters have ratings up to 50 KW at Voltages of 208, 240, 277 and 480 single or three-phase. They are available with a wide variety of factory built-in or field-installed options.

Features

The UHIR unit heaters have several standard features listed below:

  • Temperature Control: Single-stage or two-stage control with built-in or remote-mounted thermostats are available on all heaters.
  • Control Options: This feature is available as a factory built-in or field-installed to meet any job specifications.
  • Custom KW’s: If your industry requires a custom KW, Heatrex is able to provide up to 50 KW.
  • Discharge Direction: This heater has the ability to be mounted for either horizontal or vertical discharge, using an optional universal wall/ceiling mounting bracket or with field-furnished threaded rods for ceiling mounting.
  • Color Options: The standard color is camel. There are also six optional colors available: grey, yellow, red, white, blue or textured beige. Heaters may be supplied with unpainted corrosion-resistant galvanized steel.

Standard Construction Features

Every standard UHIR unit heater is constructed with standard features:

  • Heating Elements: Industrial grade, 0.475″ diameter steel sheath with brazed copper plated steel fins and epoxy sealed ends. Draw-thru airflow design allows air to be pulled across the heating elements to ensure a cool element operation and even air distribution that results in a long element life.
  • Housing: Heating elements and motor are enclosed in a heavy gauge galvanized steel cabinet with a durable polyester powder coat finish.
  • Outlet Grille: Individually adjustable louvers are provided to allow direct airflow. A protective outlet fan guard is provided to prevent insertion of foreign objects.
  • Fan Motor: Permanently lubricated and thermally protected motor.
  • Built-in Controls: All units will include an automatic reset thermal cutout that will de-energize the heater if an overtemperature condition may occur. A manual reset thermal cutout, in addition to an automatic reset thermal cutout, is standard on heaters 10 KW and above. A fan relay is provided to allow the elements to heat up before fan startup and purges the heater of residual heat after shutdown. A 24 Volt transformer and disconnecting contactor are provided on most heaters. Single-phase heaters are rated at 5 KW or less have line voltage controls; 24 Volt control and contactor are available. Power fusing is standard on all heaters rated over 48 amps.
  • Mounting: Every unit will have universal horizontal or vertical discharge. Optional diffusers are available for vertical discharge. An Anemostat diffuser can be used to provide draft-free air movement at lower mounting heights. For higher mounting heights, radial diffuser with adjustable fins can be used to increase floor coverage or adjusted for a vertical down blast of air.

Applications

The UHIR unit heater successfully work in these types of applications:

  • Factories
  • Storage areas
  • Garages
  • Warehouses
  • Mechanical rooms
  • Workshops
  • Pump houses
  • Service areas in air handling units
  • Shipping and receiving areas

Please contact Heatrex to discuss how the UHIR unit heater may fit your heating requirements by visiting www.heatrex.com.

Share

Need a quote?

We market our products through a nationwide network of representatives. Contact us today!

Scroll to Top